Emissions Gubbins: Yea or Nay? 
Going to ask a question which some may view of heretical...after my description of the current state...but here goes...

I'm continuing my quest to return 3291R to decent mechanical condition (acknowledging that I'm also working on renovating the interior to some extent...). Somewhere along the line, a (d)PO thought it was a good idea to remove all the fuel vapor containment devices...the catch can, charcoal canister, and the VCG breather (PCV, after a fashion) gubbins and throw them in the packing cases of parts that I'm digging through.

In doing so, they just cut the vent lines from the fuel filler necks and left open to the atmosphere. Accordingly, I get a whiff of gas smell in the cockpit from time to time. And, to be honest (though I'm not a tree-hugging ecomentailst), it does bother me a bit that I'm just venting hydrocarbon vapors to the outside world when I don't have to. So...I'm starting to assemble the bits to put things at least back together to close off the system to free atmosphere.

To that end, I've acquired a nice air/oil separator for the PCV system (and will go about plumbing that in, mounting the can in the right rear dead space next to the boot and running the air back to the backplate of the carb air box), and would like to plumb the fuel vapor containment system. For that, besides a healthy run of hose to run back and forth as per the diagram in the parts manual...I need to source a charcoal canister...if not to feed back to the base of the carbs (the ports for that are capped off right now), at least to filter the vapor from the ports on the filler neck.

So...has anyone sourced a useable charcoal can? Is my idea without merit? z

Heretical, I know...putting emission stuff back on...but, thinking of doing my small bit (not to mention not getting fuel vapors in the cockpit...).

Comments

Add Comment
Fill out the form below to add your own comments.









Insert Special: