LinksReplaced plugs (removed ones are black and sooty...). Thinking of investigating the ignition timing next. And getting the ass end up in the air to get the left tank out and on it's way to Moyer in PA to be sealed.
At this rate, I don't forsee her being ready for the road for a while.
UPDATE:
Maybe it would help if the dizzy was timed properly. Just for S&Gs...reached under the carbs (the airbox is off...), and found that the distributor lock plate was not tightened down. Now, Who the F would fiddle with a dizzy and not lock it down when they were done. Not going to blame the PO, since he was a Porsche/Audi man, but, geez, people.
Now, have to figure out where TDC is and get the distributor lined up so I can at least time it. Thinking that was the issue all along with getting it running. We'll see.
[ add comment ] ( 119 views )
1. Car starts, runs badly. Fluffing, spitting, minor backfiring. Seems real rich. No acceleration when you step on loud pedal. Have rebuild kits, will pick up some plugs and time her. Dizzy had retard capsule removed in the 70s, may pull it out and make sure the advance is working and do the wires, cap, and rotor while I'm at it. Start from known good bits rather than try and make do with what's been in there since who knows when.
2. Brakes. What a complex, too-many-unions, system. Pedal soft, PDWV lit, servos disconnected, but still connected inline. Thinking stripping it all out, smaller bore master cylinder (Triumph Spitfire?) and return it to the S2 configuration which is simpler and less bits to cause issues.
3. Shift lever bushings. The lever rotates a bit. Have Steve's bronze replacements. Fast, simple fix for that (after polishing the tang at the end to reduce friction a bit more...). Bearing on the frame seems ok. Can always get one from Ray, but again, it seems ok.
PO claimed that head gasket was bad, which was why he convinced himself to sell it. Will do a leak down and compression check. Worst is that I have to pull the head, clean it up, and re-gasket properly.
So...not ready for the road, but that's not the point, right? LOL. Too bad Dave has retired...paint is tired. But it adds to the patina. Chrome bumpers polished right up, though. No major pitting or discoloration. So, there is that...
[ add comment ] ( 113 views )
Anyway, moderate the Fakebook Lotus Europa group, was part of the team that digitized all the manuals in '07 that were originally kept on Jerry Johnson's site (and echoed on mine and copied and sold by unscrupulous EBayers for tens of dollars...not realizing there are Easter Eggs in there..;)), and have been a Europa guy since I saw my first one in my buddy's dad's garage (a blue 74 tcs!) in 1975.
Anyway, along the way...have owned 444R (you always remember your first...IIRC, Peter Blackford has her, I think still on the road), 0004R (broken up for parts), 65/2163 (sold so could buy a Jaaaag XJ8), 65/2678 (broken up for parts), 693R, which is the subject of a painfully long restoration journal on my website and was sold in 2019 so I could (stupidly) buy a restored MGB (POJunk).
Got rid of the B. Don't see the fascination, other than you can get most parts readily...but compared to the Lotus (any of them)? Nah.
So...have adopted a 74 TCS, 3291R, ostensibly with JPS #142 badge on the dash, a cert from Andy Graham testifying to same, the original Lotus East documents, and a thick binder of service orders stretching back to the first 500 mile service detailing a car that was, sometimes, ridden hard and put away wet, and others was a garage queen. Not an uncommon story, right?
There should be a 12-step program for Lotus ownership. Hi, my name is Bryan, and I'm a Lotus nut.
Supposed to be delivered this afternoon. Want to publicly thank the previous caretaker...who put a whole 21 miles on the car since he bought it in '19. Needs a bit of fettling...brakes are wonky...that complex TCS boosted system will be simplified back to the S2 formula...carbs are sadly unresponsive...can get it to idle, but step on the accelerator and it just bogs down, perhaps update the distributor and coil to a pertronix rig, and then worry about the interior. That should keep me busy for a while. Been a while since I got my fingernails grimy.
[ add comment ] ( 113 views )
<<First <Back | 1 | 2 | 3 | 4 | 5 |